Our standard systems are industry-proven. We also offer solutions tailored for your facility. Contact us for more details.

The FC-700 Flow Coater can be used for a variety of purposes. It can be utilized for high-speed priming at speeds over 700 FPM, low-speed, high-recovery staining operations, precision trim applications, and many other uses. Outfitted with a stainless-steel enclosure and recovery system, it is capable of handling the most demanding water or solvent-based coatings.

Typical applications of the FC-700 use high-pressure airless guns which spray via extension poles into the enclosure. Overspray recovery is almost 100%. The coating quality is very high due to the hydraulic atomization of the coating.

Design Features

• Computer-aided airflow design helps protect against air fog contamination outside the application area
• Radial air extraction systems draws incoming portal air and overspray contaminants down and through a series of baffles that capture atomized paint for recycling
• "State of the Art" Paint Pockets® paint arrestor prevents 99.84% of atomized paint particles from escaping to the outside atmosphere

Technical Specifications Completely-enclosed stainless-steel booth and overspray chamber Optical sensors to trigger guns 12” radial wheel blower exhaust fan unit with explosion-proof motor Air=logic system for control and delay of guns Graco pump for paint delivery ARO diaphragm transfer pump system for overspray return Large filter surge chamber Up to 4 Graco high-pressure spray guns